The Triton

Editor's Pick

Final Christensen launched in Vancouver; yard moves to Tennessee

ADVERTISEMENT

Christensen has launched the last hull to be completed and delivered from its Vancouver yard. 

The 164-foot (50m) Jackpot, launched the week of June 19, was delivered to a pair of experienced owners in New Jersey. 

The yard is moving to facilities that have been under construction since 2008 in Tennessee. One partially completed 164-foot vessel, Hull 42, is expected to launch this week and delivered to a client who will complete the yacht, according to a company press release.

“We owed it to our clients to give them the yachts they had contracted,” stated Henry Luken, chairman of Christensen Shipyards. “That was our priority, along with making sure all our subcontractors, personnel and suppliers were fully repaid what they were owed when the company went into receivership.”

M/Y Jackpot, the final completed Christensen launched from Vancouver.

The move to Tennessee, which puts the yard closer to East Coast markets, will double its capacity, with 13 construction bays in a 55-acre, climate-controlled shed, each capable of accommodating yachts up to 230 feet (70m). According to the company, when the facility opens later this summer, it will be among the world’s largest superyacht build yards under a single roof. The facilities are located in Vonore, Tennessee, adjacent to the Tennessee River and a 20-minute drive from Knoxville. The Tennessee Valley lake-and-river system allows passage for yachts to reach the Gulf of Mexico from the shipyard in under 10 days.

“This is a huge step for us, but also for American yacht building, which has been in steady decline for the last two decades,” Luken stated. “In our new range, we can now compete with any builder in the world in both price and quality, and unlike our existing facility, we can offer yachts virtually unrestricted in beam.”

Luken noted that Tennessee is one of the biggest fiberglass boatbuilding centers in the world, thanks to Sea Ray and other powerboat builders who employ as many as 5,000 builders within a 30-mile radius of the new yard. 

“Tennessee is also at the center of American fine cabinet-making,” Luken said.According to the company, several former owners have expressed interest in its new line of 55-65m high-volume yachts, and the owner of M/Y Chasseur is in negotiations for the purchase of a new LY3-compliant 164-foot (50m) yacht to be built at the new yard.

Related Posts...
Derecktor shipyard in Dania Beach, Florida, has been recognized by Read more...
International marina management company Island Global Yachting has taken over Read more...
Varadero Valencia shipyard in Spain has launched a new 300-ton Read more...
Marina Bay Yachting Center in Fort Lauderdale recently unveiled four Read more...
Cape Charles Yacht Center in Cape Charles, Virginia, recently announced Read more...

Share This Post

Leave a comment

Your email address will not be published. Required fields are marked *

Please answer the question below to leave a comment. * Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Editor’s Picks

M/Y Anodyne refit at a standstill at Derecktor

M/Y Anodyne refit at a standstill at Derecktor

By Lucy Chabot Reed Work on M/Y Anodyne -- a massive refit of a small-ish yacht designed to make it bigger -- was halted on Aug. 13. …

Medieval sites, modern marinas lure yachts to Split

Medieval sites, modern marinas lure yachts to Split

Story and photos by Alison Gardner After four visits to the Croatian Adriatic coast in 10 years, I am convinced that it is a yachting …

Diver assesses Bahamas reefs after hurricane

Diver assesses Bahamas reefs after hurricane

Story and photos by Kevin Davidson Some time has passed and our memories of Hurricane Dorian are perhaps fading away a bit. The scenes …

Triton networks with Culinary Convenience

Triton networks with Culinary Convenience

More than 250 yacht captains, crew and industry professionals gathered for our first Triton Networking of 2020 at Culinary Convenience, a …