The Triton

Where in the World

Yellowed piping telltale sign exhaust is too hot

ADVERTISEMENT

By Mike Prado

Many times when we visit yachts at the marinas and shipyards, we see that the main engine and generator exhaust wet section’s piping and mufflers, which are typically fiberglass and painted or powder-coated white, have turned yellow.

This discoloration is due to the exhaust temperature being too hot for the fiberglass and paint. Some of the conditions that can cause this overheating are exhaust gas temperatures, mixer tank efficiency, exhaust system piping geometry and muffler design. 

Calculating the velocity of the exhaust gases, exhaust temperature and waterflow from the engine water pump or auxiliary pump is critical. The manufacturer of the engine supplies the specifications for the water pump flow rate. This flow rate, along with the exhaust gas temperature and volume, is used in the design of the mixer tank. Note that it should be considered that some of this water flow could be diverted for other components, such as transmissions or shaft cooling, reducing the flow rate for the exhaust system. 

Also important: If the time/distance from the point where the hot exhaust gases come in contact with the raw water from the mixer tanks is too short, gases are not properly cooled and cause hot spots, which is the reason for the discoloration. In some cases, this can be remediated by the addition of a spray nozzle to aide in the cooling. Calculations need to be made to ensure the additional spray nozzle does not negatively impact the initial cooling by the mixer tank. 

The geometry of the piping between the turbo and the hull outlet – including the diameters, angles of elbows, length, compensators, hoses, valves and other materials – needs to be properly calculated. The diameter for inlets and outlets of all components from the outlet of the turbo to the inlet of the mixer tank-diffuser, including the diameter and thickness of the mixer tank itself, must be designed properly.

The muffler internal design calculation should have a minimal restriction for the exhaust gases, and location consideration of the waterline for the yacht. Placement too far below the waterline will increase the back pressure to the engine and also increase engine room temperature.

Proper design, calculations, engineering, manufacturing, and use of quality materials according to the engine manufacturers specifications all play an important role in ensuring a well-performing exhaust system that can last for decades.

Mike Prado is vice president of business development with DeAngelo Marine Exhaust in Fort Lauderdale. Comments are welcome below.

Related Posts...
By Capt. Patrick “Doc” Connelly This question could be asked Read more...
By Maria Karlsson Since Jan. 1, the Tax Cuts and Read more...
By Capt. Jeff Werner There is no emergency aboard a Read more...
By Joe Johnson The main reason to do background checks Read more...
By Lisa Samuels As I grow wiser in my life Read more...

Share This Post

Leave a comment

Your email address will not be published. Required fields are marked *

Please answer the question below to leave a comment. * Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Editor’s Picks

Loon, Lady Rose take top crew awards

Loon, Lady Rose take top crew awards

Yacht crew were recognized for excellence in 21 categories during the Crew Awards by Acrew on Saturday. About 400 yacht captains and crew …

M/Y Lazy Z crew runs its way across the Atlantic for Bahamas

M/Y Lazy Z crew runs its way across the Atlantic for Bahamas

The crew of M/Y Lazy Z are on a mission to raise money for disaster relief in the Bahamas after Hurricane Dorian. Since they cannot get to …

Cable Marine, Boat Owners Warehouse founder Elmer Strauss dies

Cable Marine, Boat Owners Warehouse founder Elmer Strauss dies

By Dorie Cox From boatyards to retail stores, Elmer Strauss built a collection of businesses that helped change the face of the yacht …

Why come to the Triton Expo

Why come to the Triton Expo

Oct. 16, 5-8 p.m. It’s time for The Triton’s biggest event of the year -- the Triton Expo, this time held on the third Wednesday of …