The Triton

Editor's Pick

Captain’s creativity protects engine investment

ADVERTISEMENT

By Capt. Rocka Romcke

I don’t think any engineer would disagree that to maximize engine performance, we need to give it clean fuel, clean air and clean oil. Years ago, we relied on the engine manufacturer’s standard supplied filters to do these three types of filtering. Then, over the years, there have been developments and improvements, some of which we now take for granted.

Fuel filtering has come a long way, and we have welcomed these new methods to improve cleanliness and reduce restriction. I am confident that every superyacht has extra fuel filters on their engines, such as Racors or other brands. Most large yachts also have fuel spinners like Alfa-Lavals, and some also add fuel polishers. We have been going to extreme lengths to clean fuel, and we benefit from added reliability and less wear and maintenance on fuel-related parts. Like fuel filtration, we used to only rely on standard air filters. Now, after-market filters are standard procedure. 

But when it comes to oil, some yachts only supplement their engine’s standard full-flow filters with centrifugal filters, or “spinners”. But these only address the issue of particle removal. Plus, while the combination of OEM filters and spinners can filter particles down to 10 microns, smaller particles can cause significant engine wear. 

As a yacht captain, I do all I can to protect my engines since my job is to protect the owner’s investment. So, when I bought a pair of C18 Caterpillar engines, I put both spinners and a bypass filter system on them.

A triple row of MTF 240 by-pass filters on 2,700hp 3516 Caterpillar engines onboard a 78m Lurssen. Photo provided

So, what does the filter system do above and beyond a spinner? It addresses all three issues facing used oil. First, it can remove solid contaminants down to the size of less than 1 micron, which greatly reduces wear on the engine. Second, it removes liquid contaminants, including water, by using a patented polymer technology. Third, it replenishes the oil with a “slow release” of base additives to maintain the oil’s chemical balance and viscosity, and keeps the TBN (Total Base Number) levels up to well within engine manufacturers’ specifications. This triple-action process keeps engines running on continuously clean oil, as opposed to adding new oil that just keeps getting dirtier.

I chose Puradyn systems for a number of reasons. They are running on the diesel engines found in roughly 50% of all land-based oil rigs in the U.S., and their customers have publicly reported savings from reduced maintenance and up to 80% less oil purchased. One of the largest oil drilling companies, Nabors Industries, recently reported that they are now able to skip mid-cycle, top-end engine overhauls, and they attribute it to using Puradyn for over a decade to keep their engines cleaner. Part of the cleaner, greener angle is using less oil overall. Depending on engine type and use case, Puradyn users have reported a reduced oil change frequency of between 66-89%. For those of us in marine environments, this also means a similar reduction in the potential environmental hazard of waste oil storage and disposal.

Condition-based maintenance (CBM) has taught us to perform maintenance as it is needed, not by way of blatantly following a book. That was the standard practice for more than 100 years, and it was designed to take care of those worst-case scenarios. Engine manufacturers have little to lose by proposing super safe oil change hours. If you ask them for longer oil change intervals, they give you a bigger sump. That just lets you change oil less often, but the same amount of oil is changed in the long run. I consider this false advertising.

A small MTF 40 bypass filter installed on a 350kw Caterpillar generator. Photo provided.

So why not use the practice of CBM on engine oil? Let the engine tell the engineers when new oil is needed rather than just conducting an oil change unnecessarily. The antiquated belief that oil must be changed according to a set schedule is much like thinking that your tires must be changed after so many miles instead of changing when worn. Most large yachts already send an oil sample away to be tested. These tests not only tell us if the oil is still good, they also tell us what metal types are in the oil, which suggests which parts of the engine are beginning to wear out. But by the time the report comes back, you may have already changed the oil even though the report shows the oil is still good to use.

There is real value in knowing that you are giving your engines the cleanest, best oil you can, just as you do with fuel and air. I ran Puradyn systems on the 78m S/Y Mirabella V with MTUs (later Cats) and Northern Lights Gens, 43m M/Y Daydream with two stroke Detroits and Northern Lights Gens, and recently installed them on the 78m Lurssen, M/Y Rocinante, (formerly M/Y TV) with Cats. These filter systems are like an insurance policy for your engine. If you feel you have to, or just want to change the engine oil at whatever interval the book or you say, fine, change it. It is up to the engineer/captain/owner when you do that. Even if you change your oil more frequently than is necessary, your engines will still benefit hugely from running on continuously cleaner oil versus only when the oil is brand new.

Puradyn filter systems can be installed on virtually any engine, and they do not void any OEM warranties. They also work on hydraulics, where the elimination of water is critical. They saved my hydraulic oil on S/Y M5. I had a huge wad of water for some reason, and to change it, flush it and change the flushing oil was going to be a messy and expensive job. We did it in less than two days with special Puradyn filters and a flushing pump. Awesome, no mess and little cost. We then installed Puradyn permanently in the hydraulic system.

Capt. Rocka Romcke has worked in the yacht industry for 34 years and holds both captain and engineer licenses. Comments are welcome below.

Related Posts...
Delta “T” Systems' new Euro-style axial replacement fan helps mariners Read more...
FLIR Systems has announced an addition to Raymarine’s intelligent docking Read more...
Netherlands-based MarQuip has created a custom solution for smaller yachts Read more...
Rhode Island-based KVH Industries has announced the November launch of Read more...
Global satellite communications company Iridium Communications has partnered with Intellian Read more...

Share This Post

Leave a comment

Your email address will not be published. Required fields are marked *

Please answer the question below to leave a comment. * Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Editor’s Picks

Triton Networks with Admiral Canvas

Triton Networks with Admiral Canvas

A luau-themed Triton Networking event last night brought about 200 yacht captains, crew and industry professionals to Admiral Yacht …

From the Bridge: Captains’ legacies continue to be created

From the Bridge: Captains’ legacies continue to be created

From the Bridge: by Dorie Cox Among the hundreds of people on the docks at the Fort Lauderdale International Boat Show last month, a …

FLIBS19: Spirit of giving reaches hundreds, raises thousands

FLIBS19: Spirit of giving reaches hundreds, raises thousands

By Lucy Chabot Reed It started innocently enough, organize a dinner and raffle off a Seabob, hopefully raise a few thousand dollars for …

Sea Sick: Commit these CPR steps to memory; seconds count

Sea Sick: Commit these CPR steps to memory; seconds count

Sea Sick: by Keith Murray Many of you reading this may be walking around the Fort Lauderdale boat show. Regardless of where you are, do …